Mirka Ultimax Ligno 125mm Grip Multifit Discs

An all-new Mirka abrasive for woodworking.

Ultimax® Ligno is tailored for wood sanding applications. Fast and even cut thanks to special hourglass abrasive pattern, long service life with good resistance to clogging. Specially developed latex impregnated paper for flexibility and edgewear resistance, features Mirka Multifit hole pattern. Its dust channels leading to extraction holes take control of dust, keeping the abrasive grains cutting, and as air circulates under the abrasive it reduces heat during sanding – an important benefit when sanding substrates, avoiding turning wood dust into a clogging putty. Even larger wood dust particles are not an issue thanks to different width dust channels. Exposure to wood dust is a significant occupational health risk, meaning Ultimax Ligno is designed from the start with Mirka’s dust free sanding technology.

• Combining a fast cut with long life, thanks to especially good resistance to clogging when sanding substrates.
• Specially made for wood:
• The new Ultimax Ligno is tailored for wood sanding applications, ensuring optimal performance and precision tailored to woodworkers’ needs. 
• Superior Alox and Ceramic Blend for additional lifetime
• Blue Alox grains, specially heat-treated and annealed for lasting hardness and even grain size, plus self-sharpening ceramic grains for extra durability.
• Suitable materials: Chipboard, Soft / Resinous wood, Mahogany, Solid surface, Ash, Dupont Corian, Teak, Veneer, Samsung Staron, Pine, Melamine, Oak, Hard wood, Birch, Beech

Backing: Latex paper, D-paper / C-paper
Bonding: Low VOC resin system
Coating: Semi-open with Selective Coating®
Colour: Red
Grain: Ceramic / Aluminium oxide
Package size: Grit 40 – 60 = 50 pcs / pack. Grit 80 – 400 = 100 pcs / pack

Hourglass Pattern

The recognisable grain pattern of the Mirka Ultimax Ligno ensures optimal cutting performance with consistent results. The segmented surface increases sanding pressure on each abrasive grain, while directing dust into the channels created in between. Its resistance to clogging prevents swirl marks in the work surface.

In addition, each segment has four sharp corners and two angled surfaces, constantly creating additional cutting edges during sanding. This gives the Ultimax Ligno a consistent fast cut and great sanding results, ready for the next step.

Resistant to Edgewear

While developing Ultimax Ligno, Mirka chose a special latex impregnated paper to prevent edgewear and tearing when sanding edges of wood surfaces. This gives the Ultimax Ligno the desired flexibility and adhesion, resulting in a longer life for each abrasive. Reducing waste starts from the development stage.

Multifit Perfornation Technology

For advanced dust extraction. To resist clogging and speed up the cutting process, Ultimax Ligno utilises
Mirka’s groundbreaking Multifit hole pattern. Its dust channels leading to extraction holes take control of dust,
keeping the abrasive grains cutting, and as air circulates under the abrasive it reduces heat during sanding
– an important benefit when sanding substrates, avoiding turning wood dust into a clogging putty.